Benchtop and freestanding dishwashers side by side

Best Dishwashers in NZ: Benchtop vs Freestanding vs Drawer

Which dishwasher should you buy?

For most New Zealand kitchens, a 60cm freestanding dishwasher is the easiest fit. A benchtop model suits renters and small kitchens with no built-in space, and a drawer dishwasher suits anyone who wants to run smaller loads. This guide explains each type, helps you work out what size you need, and shows how Midea and Toshiba fit different homes. You can browse every model in our dishwashers range at any point.

Types of dishwasher explained

The right type depends on your kitchen layout, your household size and whether you can install a machine permanently. Here is how the four main types compare.

Type Pros Cons
Benchtop No installation space needed, easy to move, good for renters and small kitchens Smaller capacity and uses counter space
Freestanding (60cm) Most capacity and the widest choice, and it slides into a standard gap Needs a gap about 60cm wide, plus water and drainage connections
Integrated Hides behind a cabinet door for a seamless look Usually costs more to buy and install, and is harder to swap later
Drawer Run one drawer for a small load, and the drawers are easier to load at waist height Often costs more per place setting than a freestanding model

If you rent or have no space for a built-in machine, start with our benchtop dishwashers. If you have a standard kitchen gap, our freestanding dishwashers range offers the most capacity for the money.

What size dishwasher do I need?

Dishwasher size is measured in place settings, which is one person's plates, bowls, glasses and cutlery. A benchtop model usually holds around 4 to 6 place settings, a 45cm slimline around 9 to 10, and a 60cm model around 12 to 15. Check the exact figure on each product page, because it varies by brand.

Household Suggested size Good to know
1 to 2 people Benchtop or 45cm A benchtop works if you have counter space, a 45cm if you have a narrow gap
3 to 4 people 60cm, 12 to 13 place settings Handles a full day of dishes without running twice
5 or more people 60cm, 14 to 15 place settings Better for big meals, entertaining and baking trays


How to measure for a dishwasher

  1. Measure the width, height and depth of the gap, or the counter space for a benchtop model.
  2. Allow room behind the machine for hoses and a power point, and check the door can open fully.
  3. For a benchtop model, check how it connects to the tap and whether your tap suits it.
  4. Compare your measurements with the dimensions listed on the product page.

Single vs double drawer dishwashers

A single drawer dishwasher suits one or two people, small kitchens and anyone who runs small loads. A double drawer gives two independent compartments, so you can run one for a light load or both for a full day of dishes. Browse our drawer dishwashers to compare sizes and prices.

Feature Single drawer Double drawer
Best for 1 to 2 people, small kitchens Families who want flexible loads
Capacity Smaller Closer to a standard dishwasher
Running cost Lower for light loads Efficient when you run only one drawer
Price Usually lower Usually higher


Features worth paying for

A longer feature list does not always mean a better dishwasher, so focus on the features that change how it performs every day.

Open dishwasher showing racks and cutlery tray, with the touch control panel

  • Noise level: if your kitchen is open plan, compare the decibel rating on each product page and favour a quieter model.
  • Wash programs: look for a quick wash, an eco program and an intensive cycle for pots and pans.
  • Drying: check how the model dries dishes, because better drying means less wiping.
  • Energy and water ratings: a more efficient model usually costs less to run over its life.
  • Racks and cutlery tray: adjustable racks and a third cutlery tray make loading easier.
  • Delay start: useful if you want it to run off-peak or overnight.
  • Warranty and local support: choose a model with a clear NZ warranty and easy access to service.

Best value dishwashers

A good-value dishwasher is the one that does the job you need at a price you are comfortable with. Set your budget first, then compare models within it.

Midea vs Toshiba: which brand suits you?

We stock Midea and Toshiba dishwashers, so you can compare both brands in one place. Choose by budget, size and the features that matter to your household.

Installation basics

Most dishwashers need a power point, a cold water supply and a drain connection. A benchtop model is simpler, because many connect to the kitchen tap, so check the product page. A freestanding or integrated model usually needs plumbing, so use a licensed plumber and electrician where required. Always follow the installation instructions that come with the machine.

Frequently asked questions

What is the best type of dishwasher for a small kitchen?

A benchtop or 45cm slimline model usually fits best. A single drawer dishwasher is another good option if you want a built-in look.

How many place settings do I need for a family of four?

Around 12 to 13 place settings suits most families of four. Choose 14 to 15 if you entertain often or cook a lot.

Are drawer dishwashers worth it?

They can be, if you often run small loads or want easier loading. They usually cost more per place setting than a standard freestanding dishwasher.

Are benchtop dishwashers as good as full-size ones?

They clean well, but they hold fewer dishes. They suit one to two people, renters and small kitchens best.

Do dishwashers use less water than washing by hand?

Often yes when you run a full load, though it depends on the model and how you wash by hand. Check the water rating on the product page.

How do I measure for a dishwasher?

Measure the width, height and depth of the gap, allow room for hoses and the door, and compare with the dimensions on the product page.

Not sure which dishwasher suits your kitchen? Visit our Midea store in Christchurch and our team will help you choose.